Edge Eyewear Safety Tests from Carbide Processors – Ballistics
All Carbide Processors Edge eyewear has been tested by independent laboratories and exceeds all required standards
Ballistic Tests
Edge eyewear ballistics test
MCEPS GL-PD 10-12 Formerly: MIL-PRF 31013 3.5.1.1
Simulates a shotgun blast from 33 feet
150 ft/s (102 MPH): AN51 Z87.1+ 2010
660 ft/s (450 MPH): Ballistic MIL-PRF 31013 3.5.1.1
What Constitutes a Failure?
Section 6.2.1 – When each type of test is conducted as indicated in Sections 6.2.2, 6.2.3 and 6.2.4 a complete device shall fail if any of the following occurs:
- Piece fully detached from the inner surface
- Fracture
- Penetration of the rear surface
- Lens not retained
- For the high-velocity test, the unaided eye observes any piece adhering to the contact paste, or observes contact paste on the projectile or complete device.
Buy Edge Eyewear – Outstanding safety & Outstanding Style
www.carbideprocessors.com
sales@carbideprocessors.com
800 346-8274
Tags: About Carbide Processors, Edge Eyewear, Quality, safety
Leave a Reply
