saw blade

The Horny Teenagers Theory of Brazing

The Horny Teenagers Theory of Brazing  There is way too much braze alloy outside the joint or join. I looked at eight other sawblades from different manufacturers and this is a common problem.  As with any quality issue, if you … Continue…

Tags: , , , , , ,

Automatic Brazing

Automatic machinery isn’t I have just spent a couple of hours helping a gentleman in Canadawith a saw failure problem.   This is a sawmill and the shoulders are ripping off the saws. They are using a Kaehny automatic razor with … Continue…

Tags: , , , , ,

Popular Tools Combination and General Purpose Saw Blades

The Difference Between Combination and General Purpose Saw Blades Roughly, roughly –  Combination saw blades are contractor level blades. –  General purpose blades are handyman, homeowner blades. –  Serious hobbyists and production facilities use special blades for the tools and materials … Continue…

Tags: , , , ,

Tenryu Saw Blade Quality

Tenryu Saw Blade Quality – Even the packaging is great.
Continue…

Tags: , , , ,

How to Read a Saw Blade

How to read saw blade codes and why they are important Continue…

Tags: , , , , ,

Carbide Saw Blade Specification Manual: P.22 Equipment for Quality Control

Carbide Saw Blade Specification Manual: P.22 Equipment for Quality Control

Continue…

Tags: , , , , ,

Carbide Saw Blade Specification Manual: P.21 Strobe Saws: Cutters

Strob Saws: Cutters Specification All design elements of the Strob slot shall be as specified, within the following tolerances: Recommended            Tolerance • Material                                Stellite/Carbide • Insert Hardness                                                        ± 1 Rockwell • Width                                   Kerf-0.010″                 +0.000″ / -0.003″ … Continue…

Tags: , , , ,

Carbide Saw Blade Specification Manual: P. 19 Carbide Tips: Grinding

Specification Grinding angles and tolerances shall be as listed below: Recommended Angle             Tolerance • Kerf (tip width)                                                                    +0.000″ / – 0.002″ • Hook Angle                                      30°                               +/- 1 Degree • Top Clearance                                   8°                                 +/- 1 Degree … Continue…

Tags: , , , , ,

Saw Blade Tip Loss

These tips had been plated to make them wet and braze well. The plating did wet and braze well but the plating did not stick to the tungsten carbide saw tip at all well. This is entirely the fault of … Continue…

Tags: , , , ,

Carbide Saw Blade Specification Manual: P.18 Carbide Tips: Size and Placement

Carbide Saw Blade Specification Manual: P.18 Carbide Tips: Size and Placement Continue…

Tags: , , , ,

Older posts
Newer posts

Recent Posts

Blog Calendar

December 2024
S M T W T F S
1234567
891011121314
15161718192021
22232425262728
293031