Carbide Saw Blade Specification Manual: P. 9 Saw Plates: Finish
Carbide Saw Blades: Finish
Specification
Surface finish (or smoothness) shall not exceed 32 Mu for guided saws, or 64 Mu for non-guided saws.
Verification
Finish can be verified with a Gould Surfanalyzer 7100. Readings are taken on each side of the saw plate, near the middle of the saw plate, in both radial and tangential directions.
We sell great custom saw blades
Buy Tenryu and Popular Tools saw blades
800 346-8274
Leave a Reply
