Carbide Saw Blade Specification Manual: P.19 Carbide Tips: Grinding

Carbide Saw Blade Specification Manual: P.19 Carbide Tips: Grinding

Carbide Saw Blade Specification Manual: P.19 Carbide Tips: Grinding

 Specification

Grinding angles and tolerances shall be as listed below:

Recommended Angle                Tolerance

• Kerf (tip width)               +0.000″ / – 0.002″

• Hook Angle                        30°    +/- 1 Degree

• Top Clearance                     8°      +/- 1 Degree

• Radial Clearance                3°      +/- 1 Degree

• Tangential Clearance       3°    +/- 1 Degree

• Side Clearance (left or right)   Equal   +/- 0.0011,

Verification

  • Kerf: Use standard 0-1″ “C” micrometer on several random tips.
  • Hook and top clearance angles: Use a precision protractor on several random tips.
  • Radial Clearance: Use a 0-1″ micrometer with pointed anvils. Measure several random tips – see angle equivalent table in appendix.
  • Tangential Clearance: Use a 0-1″ micrometer with pointed anvils. Measure several random tips.
  • Side Clearance: Use a side clearance gauge to check centering. Measure several random tips on each side.

Buy great custom saw blades

Buy Tenryu and Popular Tools saw blades

www.carbideprocessors.com

sales@carbideprocesors.com

800 346-8274

Tags: , , , ,

Leave a Reply

Recent Posts

Blog Calendar

July 2017
S M T W T F S
« Jan    
 1
2345678
9101112131415
16171819202122
23242526272829
3031