Carbide Processors Blog

Carbide Saw Blade Specification Manual: P. 20 Carbide Tips: Brazing

Posted on Tuesday, March 27th, 2012 at 10:11 am. Tweet

Carbide Saw Blade Specification Manual: P. 20 Carbide Tips: Brazing

Hardness, Measurement Points  (1/8″ apart)

Specification

• Hardness adjacent to braze shall be ± 2 points of Rockwell “C” of the specified plate hardness.

• Braze shall cover the full area of contact between tip and notch.

• Solder shall be clean, smooth and bright, without cracks or porosity.

• Tips shall be centered on each notch, and square with the plate.

Verification

Use a X10 hand lens to inspect several joints.

Hardness must be tested with a reliable bench type Rockwell hardness tester.

Buy great custom saw blades

Buy Tenryu and Popular Tools saw blades

www.carbideprocessors.com

sales@carbideprocesors.com

800 346-8274

Tags: Popular Tools, Quality, saw blade, saw blades, sawblades, Tenryu