Carbide Saw Blade Specification Manual: P.22 Equipment for Quality Control
Function (listed alphabetically) Recommended Equipment
Back Clearance Angle Precision protractor
Bolt (Pin) Holes (dia. of holes) Set of pin gauges, or caliper
Bore Bore gauge set, Mitutoyo #511-164
Bolt Circle Diameter 6″ to 8″ dial caliper
Brazing 10x lens
Concentricity Test Arbor, Dial Indicator
Diameter (Outside) Large caliper
Diameter Of Slot Relief Hole Set of pin gauges or caliper
Face Outset (Carbide) Dial Caliper
Finish Surface roughness analyzer (Gould Surfanalyzer #7100)
Flatness Test Arbor, dial indicator
Gullet Area Trace gullet on 1/8″ graph paper, count the squares that are over 1/2 full, divide the total by 64 to get sq-in.
Gullet Profile Compare to sample
Hardness Rockwell Hardness tester (“C” scale for steel, “A” for carbide)
Height Above Back (Carbide) Dial Caliper
Hook Angle Precision Protractor
Kerf 1″ C-type micrometer
Length of (Carbide) Tips 6″ Dial Caliper
Pitch 6″ Dial Caliper
Radial Clearance Angle 0-1″ micrometer w/pointed anvils
Runout Test Arbor, dial indicator
Side Clearance Side Clearance Gauge
Spline Inside micrometer or caliper, size depends on spline
Tangential Clearance Angle 0-1″ micrometer w/pointed anvils
Thickness (Saw Plate/Carbide) 1″ C-type micrometer Starrett #216 FL-1
Top Clearance Angle Precision Protractor
Buy great custom saw blades
Buy Tenryu and Popular Tools saw blades
800 346-8274
Tags: Popular Tools, Quality, saw blade, saw blades, screwdrivers, Tenryu
Leave a Reply
