Carbide Processors Blog

Save up to 30% on Select Toolkits!

Questions or Comments?
(800) 346-8274

Braze Alloy

Solving Brazing Problems-part 2

Posted on Monday, June 25th, 2012 at 10:41 am.

There are many things that can cause brazing problems to occur. In the first part of this series, Solving Brazing Problems, we discussed how cleaning the steel before brazing and cleaning the saw tips can have a great effect on … Continue…

Tags: black flux, Braze alloy, Brazing, brazing flux, saw tip

How Much Should Braze Alloy Flow

Posted on Tuesday, February 28th, 2012 at 1:43 pm.

When brazing a half inch long carbide saw tip to a steel saw plate. The braze alloy flat should be 0.005” to 0.010” maximum with a half inch long tip White bars The braze alloy should flow onto the plate … Continue…

Tags: brazed tools, saw blades

The Horny Teenagers Theory of Brazing

Posted on Friday, February 24th, 2012 at 3:01 pm.

The Horny Teenagers Theory of Brazing There is way too much braze alloy outside the joint or join. I looked at eight other sawblades from different manufacturers and this is a common problem. As with any quality issue, if you … Continue…

Tags: brazed tools, Brazing, circular saws, Quality, saw blade, saw blades, sawblades