Braze Alloy

How Much Should Braze Alloy Flow

Posted on Tuesday, February 28th, 2012 at 1:43 pm.

When brazing a half inch long carbide saw tip to a steel saw plate. The braze alloy flat should be 0.005” to 0.010” maximum with a half inch long tip   White bars The braze alloy should flow onto the plate … Continue…

Tags: ,

The Horny Teenagers Theory of Brazing

Posted on Friday, February 24th, 2012 at 3:01 pm.

The Horny Teenagers Theory of Brazing  There is way too much braze alloy outside the joint or join. I looked at eight other sawblades from different manufacturers and this is a common problem.  As with any quality issue, if you … Continue…

Tags: , , , , , ,

Brazing or Silver Soldering Strength

Posted on Thursday, January 19th, 2012 at 11:01 am.

Best braze alloys (silver solders) and flux for best tool strength Continue…

Tags: , ,

Brazing Procedures Specifications

Posted on Monday, December 5th, 2011 at 5:53 pm.

An overview of brazing procedure considerations Continue…

Tags: , , ,

How to Make Carbide Brazing Faster

Posted on Wednesday, September 21st, 2011 at 11:41 pm.

How to Make Carbide Brazing Faster using simple, inexpensive techniques Continue…

Tags: , ,

Braze Alloy Forms

Posted on Friday, August 12th, 2011 at 11:11 pm.

Braze Alloy Forms, what they are and some attributes of each
Continue…

Tags: , ,

Brazing Handbook – Cheap Or Free

Posted on Thursday, July 7th, 2011 at 3:37 pm.

AWS Brazing Handbook – Cheap Or Free Continue…

Tags:

Brazing Books – Free or Cheap

Posted on Monday, June 27th, 2011 at 5:10 pm.

Free or cheap 4th edition AWS Brazing Handbook Continue…

Silver Solder Versus Silver Braze

Posted on Tuesday, May 10th, 2011 at 4:47 pm.

The difference between silver solder and silver braze is huge and very important. Continue…

Tags:

Braze Alloy (Silver Solder) Melting Temperatures

Posted on Friday, March 11th, 2011 at 11:12 pm.

Braze alloy melting temperatures and why actual practice can differ from theoretical Continue…

Tags: , , , ,